 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 14 Pin DIP Package HTFLxx Series HTVLxx Series HTFHxx Series HTVHxx Series www..com TCXO / VCTCXO 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Description US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 The Connor Winfield 14 Pin DIP Temperature Compensated Crystal Controlled Oscillators (TCXO series) and Voltage Controlled Temperature Compensated Crystal Controlled Oscillators (VCTCXO series) are designed for use in applications where high frequency stability performance is required. Through the use of Analog Temperature Compensation this device is capable of holding sub 1ppm stabilities over the commercial or the industrial temperature ranges. Many features are available to meet your design requirements. Features: Available RoHS Options: RoHS Compliant / Lead Free RoHS Compliant / Terminations Contain Lead Fixed Frequency with Tr-State E/D (TCXO) or Voltage Controlled (VCTCXO) Available Supply Voltages:3.3v or 5.0v Low Jitter >1ps Rms Available Frequency Stabilities: 6.4 Mhz to 50 Mhz, 0.28 Ppm pk-pk, 0.20 ppm, 0.25 ppm, 0.28 ppm, 0.50 ppm, 1.00 ppm, 2.50 ppm, 4.60 ppm Available Frequency Stabilities: >50 Mhz to 156.25 Mhz, 0.50 ppm 1.00 ppm, 2.50 ppm, 4.60 ppm Available Temperature Ranges: 0 to 70C or -40 To 85C Tri-State Enable / Disable Function or Voltage Control Pin 1 Hermetically Sealed 14 Pin Dip Package Absolute Maximum Ratings Table 1.0 Parameter Storage Temperature Supply Voltage (Vcc) Input Voltage (Vcc) Minimum -55 -0.5 -0.5 Nominal - Maximum 125 6.0 Vcc+0.6 Units C Vdc Vdc Notes Ordering Information Bulletin Page Revision Date Tx137 1 of 4 05 08 January 2008 HTFL6D - 12.800 MHz TCXO SERIES CENTER FREQUENCY Specifications subject to change without notice. All dimensions in inches. (c) Copyright 1998 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www..com www.conwin.com Operating Specifications Table 2.0 Parameter Center Freq (See Table 8) (Fo) Minimum 6.40 Nominal - Maximum 156.25 Units MHz ppm ppm ppm ppm ppm ppm C C Vdc Vdc mA mA pS RMS pS RMS pS RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz mS nS nS Notes 1 2 3 4 4 4 Notes: 1) Initial calibration @ 25C. Specifications at time of shipment after 48 hours of operation. 2) Frequency stability vs. change in temperature. [(Fmax-Fmin)/2], where the Fmax and Fmin values are in ppm. 3) Frequency stability for a +/- 5% supply voltage change. 4) Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration and aging (20 years). 5) Oscillator output is enabled with no connection on pin 1. Output is at high impedance when disabled. Frequency Calibration - All Models -1.0 1.0 Frequency Stability vs. Temperature [(Fmax-Fmin)/2] (See Table 8) Freq. Stability vs. Voltage - All Models Total Frequency Tolerance - HTxxxA through HTxxxF Total Frequency Tolerance - HTxxxG Total Frequency Tolerance - HTxxxH Aging (20 years) - All Models 3.300 5.00 6 9 -50 -80 -110 -135 -150 -150 0.20 4.6 6.1 20.0 3.0 70 85 3.465 5.25 10 25 1 3 3 10 1.0 2.0 Operating Temperature Range (See Table 8) Model: HTxx5x- Series 0 Model: HTxx6x- Series -40 Supply Voltage (See Table 7) Model: HTFLxx or HTVLxx - Series (Vcc) 3.135 Model: HTFHxx or HTVHxx - Series (Vcc) 4.75 Supply Current (6.4 to 50 MHz) (Icc) Supply Current (>50 to 156.25MHz) (Icc) Phase Jitter (BW =12KHz to Fo/2) Phase Jitter (BW =10Hz to Fo/2) Period Jitter SSB Phase Noise at 1Hz offset SSB Phase Noise at 10 Hz offset SSB Phase Noise at 100 Hz offset SSB Phase Noise at 1 KHz offset SSB Phase Noise at 10K Hz offset SSB Phase Noise at 100 KHz offset Start-Up Time: Oscillator TDEV @ 1 second TDEV @ 4 seconds - Input Characteristics for VCTCXO Models Table 3.0 Parameter Minimum 0.5 10 1 Positive >100K Nominal 1.65 2.5 - Maximum 3.0 4.5 - Units Vdc Vdc ppm % Ohm Notes Control Voltage Range (Vcc = 3.3V) (Vc) 0.3 Control Voltage Range (Vcc = 5.0V) (Vc) Frequency Tuning Linearity Slope Input Resistance Input Characteristics for TCXO Models Table 4.0 Parameter Enable Voltage (High) (Vih) Disable Voltage (Low) (Vil) Minimum > 70% Vdd - Nominal - Maximum < 30% Vdd Units Vdc Vdc Notes 5 5 Bulletin Page Revision Date Tx137 2 of 4 05 08 January 2008 Specifications subject to change without notice. All dimensions in inches. (c) Copyright 1998 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www..com www.conwin.com HCMOS Output Characteristics Table 5.0 Parameter LOAD Output Voltage 6.4 to 52 MHz Voltage: (High) (Voh) (Low) (Vol) Drive Current for 6.4 to 52 MHz (High) (loh) (Low) (lol) Output Voltage >52 MHz Vcc=3.3Vdc Voltage: (High) (Voh) (Low) (Vol) Output Voltage >52 MHz Vcc=5.0Vdc Voltage: (High) (Voh) (Low) (Vol) Drive Current >52 MHz (High) (Ioh) (Low) (Iol) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Minimum 90%Vcc -4 2.0 2.4 -8 45 - Nominal 50 - Maximum 15 10%Vcc 4 0.4 0.4 8 55 8 Units pF V V mA mA V V V V mA mA % nS Notes Package Characteristics Table 6.0 Package Hermetically sealed, 14 Pin DIP metal package Products suitable for convection reflow soldering. Peak temperature 260C. Maximum time above 220C, 20 seconds Process Recommendation Solder Reflow Model Number Select Table Table 7.0 Fixed Frequency Models HTFLxx HTFHxx Voltage Controlled Models HTVLxx HTVHxx SupplyVoltage 3.3 Vdc 5.0 Vdc Output LogicTyp HCMOS HCMOS xx -- Add the frequency vs. temperature range to the end of the model number. Frequency vs. Temperature Range Table 8.0 Select TableFrequency Range: 6.4 to 50 MHz Operating Temperature Ranges 0 to 70C -40 to 85C 0.28 ppm pk-pk* 5A ** 0.20 ppm *** 5B ** 0.25 ppm *** 5C ** 0.28 ppm *** 5D 6D 0.50 ppm *** 5E 6E 1.00 ppm *** 5F 6F 2.50 ppm *** 5G 6G 4.60 ppm *** 5H 6H Select TableFrequency Range: >50 to 155.52 MHz Operating Temperature Ranges 0 to 70C -40 to 85C +0.50 ppm *** 5E ** 1.00 ppm *** 5F 6F 2.50 ppm *** 5G 6G 4.60 ppm *** 5H 6H Bulletin Page Revision Date * -- Frequency vs. temperature, absolute. ** -- Frequency stabilities not available at -40 to 85C *** -- [(Fmax-Fmin)/2], where the Fmax and Fmin values are in ppm. Tx137 3 of 4 05 08 January 2008 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www..com www.conwin.com Package Dimensions Table 9.0 .310 MAX (7.87mm) RoHS 5/6 Solder Profile Temperature 225C 183C 150C 100C Ramp-Up Rate 3C/second max. from 150C to 225C. Ramp-Down Rate 6C/second max. Pin 1 7 8 14 Dimensional Tolerance: 0.005" (0.2mm) 0.02" (0.5mm) Function E / D or Voltage Control Ground Output Vcc 225C tp 25C Phase Noise Plot Phase Noise Plot HTFL6D-012.8M 0 60-120s Max. 360 Sec. Max. 10-30s 60-150s Max. Time RoHS Solder Profile Order Information Specifications Model Number, Fixed or Voltage Controlled Output, Supply Voltage - Code Frequency Stability vs. Temperature Range - Code G5 = RoHS 5/6 Compliant / Terminations Contain Lead Blank = RoHS Compliant / Lead Free Output Frequency HTVH 5D G5 - 020.0M Output Waveform HTVH5DG5-020.0M = 20 MHz MHz, Voltage Controlled VCTCXO, 5.0V, HCMOS, 0.28ppm, 0 to 70C, RoHS 5/6 Compliant / Terminations contain lead. HTFL6D-012.8M = 12.8 MHz, Fixed Frequency TCXO, 3.3V, HCMOS, 0.28ppm, -40 to 85C, RoHS Compliant / Lead Free TF TR "1" LEVEL 90% 50% 10% SYMMETRY "0" LEVEL Test Circuit 14 1 Enable /Disable or Voltage Control 8 7 Bulletin Page Revision Date Tx137 4 of 4 05 08 January 2008 |
Price & Availability of HTVFHXX
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |